Bolex Paillard H16 Betriebsanleitung PDF herunterladen (Seite 16)

If the exposed portion of the film is to be removed

from the magazine:

1. Proceed in the same manner as described above and. with the film cutter, cut the

film in the middle of the loop situated outside the magazine.

2. Depress the front button of the MST motor until the end of the film has been wound

onto the take-up core.

3. Disengage the MM take-up motor from the magazine.

4. Remove the magazine from the camera. In a dark room, take out the exposed

film and reload the magazine.

The inside of the magazine should be dusted at regular intervals with a fine anti-static

brush. For camera maintenance see the instruction manual for the camera.

Magazine maintenance

1 2 ... 11 12 13 14 15 16 17 18 19 20

Keine Kommentare

Bolex Paillard H16 Betriebsanleitung Seite 16